Military Shelter 32 x 20 x 10ft & 40 x 30 x 15ft Army Tent

32.5 x 20 x 10ft Military Shelter.
Used Once and in Very Good Condition.
The PVC sheets have all been checked and are in very good condition and the list of components are also complete. This tent cost $23,000 new before shipping and taxes.
Package Include: - Painted Heavy Duty Powder Coated Aluminium Frame. - Desert Sand Colour. - Main Cover with 10 Side Windows & 2 Flue holes. Windows have a removeable mesh and a cover flap. - Floor Sheet. - 1 x End Panel with Hard Hinged Door. - 1 x End Panel with Soft Zip Door. - Interior Insulation - Guy Ropes & Steel Pegs. - Air Plenum for either Air Conditioning or Heating. - Bolts for anchoring to Concrete. Price £2995
39 x 30 x 15ft Military Shelter Frame with End Panels. Used Once and in Good Condition but is missing the Main Cover, Floor Sheet, Ropes & Pegs. This is essentially a complete 39 x 30 x 15ft Aluminium Frame with 2 ends panels that have hard hinged pedestrian doors. The missing sheets could be fabricated or the framework could be simply clad with corrugated plastic or metal roofing sheets or simply covered by builders black polythene. This tent cost $44,000 when new.
Package Includes: - Complete Heavy Duty Aluminium Frame to make a 39x30x15ft Shelter. - 2 x Green End Panels with Single Hard Hinged Door. - Interior Insulation.
Price £1995
The end panels can be removed to allow vehicle access.
One of the other benefits of these tents is that they are classed as a temporary structure so do not need council approval.
The Alaska Structures Tents are the same type that is currently used by the US & UK Military and are used in 63 other countries.
Details of these tents can be found on the Alaska Structures website who are world leaders in this field. The tents were previously erected on concrete and has since been stored in a plastic crates. Manufacturer Specification: PVC (polyvinyl chloride) sheeting which is mold and mildew resistant, will not rot, are UV stabilized for prolonged exposure to high solar loads and exceed fire safety requirements. Rapid Deployment – capable of being completely setup in under 20 minutes. Portability – 50% less cubic volume than one-piece frame shelters.
Unmatched Durability – tested to withstand: 80 MPH sustained winds (100 MPH gusts) 20 lbs. per sq. ft. (PSF) snow load 4” of rain/hour with 40 MPH winds 100 setup/strike cycles with no major damage. 3 x Alaska Roto-Mold Containers, 2 in Green, 1 in Tan. Orignally used to ship the Alaska Structures Tents. In Used Condition with a few scuffs, a few of the clips may need replacing or adjusting but this is not currenly affecting the lids being water tight. 102” long, 40” wide by 49.5” high £325 Each.
Manufactuer Specification: Alaska Roto-Mold Containers are designed to provide a water tight, weather resistant and stackable storage solution, capable of holding up to the 2,500 pounds. These durable, reusable roto-molded containers are made in the USA using linear low-density polyethylene with UV stabilization.
I can source 3 extra green containers if required.
Local Collection from Hadstock, Cambridgeshire.
Delivery possible at an additonal cost.
Tel: James on 07581 543760 Thanks

Milweb Trade Seller
James Goodall: 07581 543760